BioPaddles® - Sabouraud Dextrose Agar (SAB)

Order Code: 5551

5551 200x200

The BioPaddles® SAB/SAB can be used for the Selective isolation of fungi (yeasts and molds) (SAB).

Sabouraud Dextrose Agar (SAB)

Enzymatic digest of casein and enzymatic digest of animal tissue provide the nitrogen and vitamin source required for organism growth in SAB. The high concentration of dextrose is included as an energy source. Agar and a proprietary polymer are the solidifying agents.


Sabouraud Dextrose Agar (SAB) is a modification of dextrose agar described by Sabouraud. SAB is used for cultivating pathogenic and commensal fungi and yeasts. The high dextrose concentration and acidic pH of the formula permit selectivity of fungi. Sabouraud Dextrose Agar is used for determining the microbial content of cosmetics, in the mycological evaluation of food, and clinically to aid in the diagnosis of yeast and fungal infections.



Culture Controls

SAB Agar
Aspergillus niger GROWTH
Candida albicans GROWTH
Escherichia coli INHIBITED
Microsporum canis GROWTH
Trichophyton mentagrophytes GROWTH




Store tightly sealed BioPaddles® in a cool, dry location. Shield from direct sunlight. Store BioPaddles® at room temperature (65 - 77°F/18 - 25°C). Avoid sudden temperature changes. Temperature fluctuations may result in condensation settling at the bottom of the vial. This will not affect the culture properties, but could reduce the shelf-life or cause the agar to separate from the plastic paddle support. Do not refrigerate. Refrigeration may result in water condensation. Avoid freezing. If freezing occurs, thaw for 3-6 hours in the refrigerator (40°F; 4.4°C). Freezing can promote excess water loss and variation in media surface due to crystal formation. Refer to Best Before End date (See: BBE stamped on vial). Discard if paddle agar appears oxidized and darker than the expected color or if contaminants appear. The expiration date is based on medium in an intact container that is stored as directed.


Liquids: Twist to remove paddle from vial. Fill vial to 40 mL fill line with the liquid to be sampled. The 40 mL volume can be used to calculate Total Viable Count (TVC) and/or Total Colony Count (TCC). Replace paddle. Allow a contact time of 15 seconds. Remove the paddle. Empty the vial. Replace the paddle in the vial.

Surfaces: Twist to remove paddle from vial. Allow the paddle surface (10 cm2) to come into physical contact with the test surface. Recovery rate is about 50%. To ensure an accurate recovery, gently sweep (or touch) the paddle to cover a 20 cm2 area. Replace paddle in vial.



Temperature Minimum Period Optimal Period
35°C (bacteria) 72 hours 5-7 days
20-25°C (fungi) 5 days 7 days

Colony Measuring

Each BioPaddles® paddle has molded media attachment points that are 4 mm in length (point-to-point). This feature provides a useful guidepost to estimating nearby colony size.


Twist to remove paddle from vial. Fill vial to 40 mL fill line with 1:9 dilution of household bleach (5.25% sodium hypochlorite). Replace paddle in vial. Allow 15 minute contact time. Remove paddle. Discard bleach solution. Replace paddle in vial and dispose. Alternatively, loosen cap and microwave for 30 seconds, autoclave, or incinerate.

Technical Documents


BioPaddle Apps



Free Lite App


BioPaddles® Colony ID™ lite


The BioPaddles® Colony ID™ lite app allows the user to presumptively identify microbe colonies on LaMotte BioPaddles® by comparing them to a library of 80 standard images covering 5 microhabitats (AIR, WATER, SOIL, SURFACE, and FOOD) and 9 paddle agar types. The image series includes side views, and top views at the colony and cell level.

Resource materials include instructions for use of the BioPaddles®, detailed fact sheets for each agar type and microbe genera (along with selected species) – including microhabitat preferences, procedures for common microbiological techniques, and examples of microbe growth on BioPaddles® from a variety of microhabitat sources.


View In iTunes

BioPaddles® Colony ID™ lite Tutorial PDF


biopaddles full app

BioPaddles® Colony ID™


The BioPaddles® Colony ID™ includes over 250 standard images covering 30+ microbe genera in five microhabitats (AIR, WATER, SOIL, SURFACE, and FOOD) on 9 paddle agar types. The image series includes side views and top views at the colony and cell level.

New camera and reporting functions allow the user to import digital images and compare their samples to know standards. It also allows the user to create and email reports.

View In iTunes

BioPaddles® Colony ID™ Tutorial PDF