|
|
PRO 250 Series |
|
 |
Every PRO250 SERIES kit includes color-coded caps to prevent mixups, and diagrammed instructions make testing a breeze. The Pool MGR. Water Quality handbook and saturation index calculator are also included. See the chart below for specifications. |
|
Our professional water analysis kits are supplied in durable, blow-molded cases for years of dependable service. Each unit features liquid reagent systems for chlorine and pH (capable of 280+ tests each). The liquid DPD reagent system is provided to monitor chlorine, while pH is tested with a single liquid indicator. Total Alkalinity, Calcium Hardness, Acid Demand and Base Demand are analyzed with drop count titrations. Cyanuric Acid is measured by turbidity. The PRO250 PLUS outfit includes all of the above plus Copper and Iron tests. |
Octa-Slides(Improved Color Definition) Each unit includes three Octa-Slide color bars with eight translucent color standards in each bar. The Chlorine and pH color bars slide into the Octa Slide viewer for one-on-one color matching. |
Cyanuric TestLaMotte’s Cyanuric Acid tablets dissolve rapidly to provide a cloudy precipitate in the presence of chlorine stabilizer. A calibrated tube is used to measure results by the disappearing dot method. |
Drop Count TitrationsHardness and Alkalinity titrations use simple drop count methods, and allows either 1 drop equal to 10 ppm or 1 drop equal to 20 ppm. The Acid and Base Demand tests are also drop count procedures. |
Color ChartPRO250 PLUS Only The Copper and Iron tests use a color chart for precise low range testing. Reactions in test tubes are compared with four color standards (0.1–1.0) while looking down through a 5 mL sample. |
Tests included are shaded |
||||||||||
Code/Model |
Free Chlorine |
Total Chlorine |
pH |
Total Alkalinity |
Calcium Hardness |
Acid Demand |
Base Demand |
CyA |
Copper |
Iron |
|
7001-NJ*/ |
0.2-3.0 & 0.5-10.0 |
0.2-3.0 & 0.5-10.0 |
6.8-8.2 | 1 drop = 10 ppm | 1 drop = 20 ppm | Drop count | Drop count | 0-100 | — | — |
|
7002-NJ/ |
0.2-3.0 & 0.5-10.0 |
0.2-3.0 & 0.5-10.0 |
6.8-8.2 | 1 drop = 10 ppm | 1 drop = 20 ppm |
1 drop = 20 ppm
|
Drop count
|
0-100
|
0.1-1.0
|
0.1-1.0 |
|
Number of Tests |
288 | 288 | 288 | 140+ | 140+ | 70 | 70 | 100 | 50 | 50 |
LaMotte CompanyP.O. Box 329 | 802 Washington Avenue | Chestertown | Maryland | 21620 |
