Test Methods

 

Colorimetric

 

Colorimetric

1. Tests which determine the concentration of a substance are based on Beer's Law. Simply stated, this says that the higher the concentration of a substance, the darker the color developed in the test, so more light is absorbed by the sample.
2. pH tests use an indicator which changes color with changes in the concentration of hydrogen ions, or the acidity of the solution.

 

Octa-Slide 2 Octa-Slide 2 Comparator

The eight color standards in the Octa-Slide are placed in a bar so that they can be compared to the sample individually.

 instatest basic icon Test Strips

Test strips are either dipped or swirled in test solutions. The resulting color reaction is compared to a color chart provided.

 color-chart-comparator

Color Chart Comparator

Color charts are laminated color standards. The reacted sample is held against the panel and compared to the color standards.

 

Electronic

 

Electroniccolorq1

1741Electonic methods generally use a special electode for measureing a specific test factor. An electrode is immersed into a sample and an amplified current or voltage is produced and translated into a digital readout.

Electronic colorimeters measure the amount of light which travels through the reacted sample, and convert the measurement to a reading as ppm, absorbance or %T. In addition to colorimeters, LaMotte manufactures instruments to test pH, TDS/conductivity, dissolved oxygen, and turbidity.

 

 

 

Titrimetric

 

Titrimetric

Titrimetric tests can be used to determine the concentration of a substance in a sample solution. After the sample is treated with an indicator, a standard titrant is added until a color change indicates a completed reaction. LaMotte offers four separate types of titration methods, allowing a choice of precision and convenience.

direct-reading-titrationt
Direct Reading Titrator

The Direct Reading Titrator is a 1.0 mL microburet calibrated to allow direct reading of the test result. Each Titrator has a specific range, but may be refilled to test higher concentrations.

test-methods--dropper-pipett
Dropper Pipet

The drop count test uses a pipet to provide fast, reliable measurements in the field. The number of drops used to obtain a color change is multiplied by a given factor to produce the test result.

 meth-bur Automatic Buret

The self-zeroing automatic buret is calibrated from 0 to 10 mL in 0.1 mL increments. It is available with a squeeze valve (pinchcock), glass stopcock, or stopcock.

 test-methods-dropper-bottlet Dropper Bottle

The dropper bottle test uses bottle tips which deliver a consistent standard drop size to add titrant to the sample. As with the drop count test, the number of drops used to complete the reaction is multiplied by a given equivalence factor to determine the concentration. Many dropper bottle tests use different sample sizes for different equivalences.