Pool and Spa Specialty Test Kits

Water analysts often need a precise measurement tool to obtain specific data. These specialty pool and spa test kits allow the user to measure specific and unique tests with increased sensitivity over a desired test range. Many of these pool and spa test kits use calibrated glassware or special comparators to achieve optimum accuracy. Most kits are designed to provide at least 50 tests.

These kits are ideal for expanding "in-store" water testing capabilities and for reliable troubleshooting on the service route. If you have a unique need for a different test or combination of tests, please contact our Technical Service Department. We supply a variety of products not listed in this catalog which will suit your specific needs.

Test Methods

dipcell-comparatortDipcell Comparator

The DipCell comparator is simple to use: dip the comparator into the water to get a sample; add reagents, cap, mix, and read.

direct-reading-titrationtDirect Reading Titration

An indicator is added to a water sample, which is then titrated using a plastic syringe until an endpoint color change occurs. The syringe shows the result directly in ppm.

 

 

drop-count-titrationtDrop Count Titration

An indicator is added to a water sample, which is then titrated dropwise until an endpoint color change occurs. The number of drops used, multiplied by a given factor, provides the ppm result.

Octa-Slide 2Octa-Slide or Octet Comparator

The reacted water sample is compared with eight color standards in a comparator block, one-to-one (Octa-Slide) or four at a time (Octet).

 

4064-014

Sequestering Agent Test Kit

Order Code: 4064

The Sequestering Agent Test Kit is esigned for the pool professional to measure the concentration (ppm) of active sequestering agent in the water sample from 0 to 20 ppm. To prevent staining from metals on the pool surface a sequestering agent chemical is often recommended.


Product Details



7016

Biguanide & pH Test Kit

Order Code: 7016

The DipCell Color Comparator displays Biguanide concentrations from your pool or spa water sample from 0 to 75 ppm, and pH levels from 6.8 to 8.2 for 50 tests. The DipCell, Biguanide and pH 15 mL test reagent bottles, and instructions are packaged in a hanging/free standing plastic clamshell.


Product Details



7017-01

Biguanide, pH & Shock Test Kit

Order Code: 7017-01

The Dipcell Color Comparator displays Biguanide concentrations from 0 to 75 ppm, and pH levels from 6.8 to 8.2. Biguanide Shock test is done by adding one shock tablet to a 5 mL water sample, then adding titrant dropwise, counting drops until sample water changes from pink to colorless.


Product Details



3619

Low Range Copper Test Kit

Order Code: 3619

A simple color chart kit for measuring Copper from 0.05 to 1.0 ppm. Eight color standards are provided on the chart. Economical and easy-to-use.


Product Details



7019

Free Chlorine & pH Test Kit

Order Code: 7019

The Free Chlorine & pH DipCell Test Kit allows the user to measure Free Chlorine 0.50 to 10 ppm and pH 6.8 to 8.2. The DipCell, 30 Free Chlorine (DPD #1Rapid) TesTabs®, 30 pH TesTabs®, and instructions are packaged in a hanging/free standing plastic clamshell.


Product Details



3156

Sodium Chloride (Salt) Test Kit

Order Code: 3156

The (Salt) Sodium Chloride Test Kit is an easy-to-use drop count titration kit for salt water pools. The salt content of the pool is measured by counting each drop of titrant added to the sample tube.


Product Details



3466

Low Range Phosphate Test Kit

Order Code: 3466

The Phosphate Low Range Test Kit measures phosphate levels from 0 to 1,000 ppb with a laminated color chart. The kit includes unit-dose, foil packaged tablet reagents for 50 tests that are simple to use with a sturdy plastic test tube.


Product Details



6838

Cyanuric Acid Test Kit

Order Code: 6838

The Cyanuric Acid (Stabilizer) test kit measures Cyanuric Acid levels at 20, 30, 40, 50, 60, 80 and 100 ppm. The kit includes 50 Cyanuric Acid visual grade TesTabs® tablets that are added to a test tube. Once the tablet disintegrates then the analyst would look down through the test tube and measure the Cyanuric Acid level by the disappearing dot method.


Product Details



6897-r

Copper Test Kit

Order Code: 6897-R

The Copper test kit is an easy-to-use drop count titration kit to measure the level of copper in you pool or spa with each drop equaling 0.05 ppm. The user would add 5 drops of Copper 1 to a 10 mL test tube of water sample and if Copper is present then a yellow-brown color will appear.


Product Details



3588-02

Low Range Manganese Test Kit

Order Code: 3588-02

The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.


Product Details



3611-01

Copper & Iron Metchek Test Kit

Order Code: 3611-01

The test kit uses a color chart that measures Copper and Iron levels at 0.1, 0.3, 0.6 and 1.0 ppm. The test kit is simple to use with just adding 3 drops of Copper reagent to a 5 mL test tube of water then matching the color reaction to the color chart.


Product Details



Alkalinity & Calcium Hardness Test Kit

Alkalinity & Calcium Hardness Test Kit

Order Code: 3583

The Alkalinity and Calcium Hardness TesTabs® test kit uses one tablet per test factor which is added to a test tube of water sample to develop a color. Sample water is added performing a back titration until an endpoint color change occurs. The results are read directly from the test tube which measures Alkalinity and Calcium Hardness from 60 to 400 ppm. The kit includes simple to read instructions, 30 TesTabs® tablets, a water sample bottle along with a preprinted test tube with Alkalinity and Calcium Hardness levels.


Product Details



7514-01

FAS-DPD Chlorine Test Kit

Order Code: 7514-01

The DPD-FAS titration test kit measures Free and Total Chlorine in 0.2 ppm and 0.5 ppm increments. The distinct color change allows for accurate readings even at very low or high chlorine levels.


Product Details