802 Washington Avenue PO Box 329 Chestertown, Maryland 21620 USA
Phone:
410.778.3100
USA:
800.344.3100
FAX:
410.778.6394
6-Series Hand-Held Meters
An outstanding lineup of instruments for measuring pH, Conductivity, and TDS. These handheld meters incorporate advanced microprocessor technology with attractive, compact designs resulting in a rare combination of hi-tech performance, user-friendly operation, and affordability.
Globe Approved!
Features:
Push button operation
Three point calibration
Temperature readout
Automatic Temperature Compensation
Auto-off after 17 minutes
Hold function
Buffer recognition (pH 5 Plus meter)
Adjustable conductivity to TDS factor (TDS 6 Plus meter)
Microprocessors have enabled meter manufacturers to combine many features into smaller designs with better accuracy. The 5 Series meters are good examples (see specifications below). All meters include electrodes and temperature probes, and are available with or without a carrying case.
The pH 5 Plus without case includes pH 4, 7, and 10 buffer tablets.
The pH 5 Plus with case includes pH 4, 7, and 10 buffer liquids.
The TDS 6 Plus and Con 6 Plus with carrying cases include two calibration standards.
All meters have two-year warranties.
Item Description
Order Code
pH 5 Meter (pH), without Case
5-0034
pH 5 Meter (pH), with Case
5-0035
CON 6 Meter (Conductivity), without Case
5-0038-01
CON 6 Meter (Conductivity), with Case
5-0039-01
TDS 6 Meter (TDS), without Case
5-0036-01
TDS 6 Meter (TDS), with Case
5-0037-01
Specifications:
Model
pH 5 Plus (pH)
pH 5 Plus (Temperature)
CON 6 Plus Meter (Conductivity)
TDS 6 Plus Meter (TDS)
CON 6 Plus & TDS 6 Plus Meters (Temperature)
Order Code
w/out case 5-0034 with case 5-0035
w/out case 5-0038-01 with case 5-0039-01
w/out case 5-0036-01 with case 5-0037-01
Range:
0.00 to 14.00 pH
0.0 to 100.0°C
0.0 to 20.00, 200.00 2,000.0 µS 0 to 20.00, 200.0 mS
0.0 to 10.00, 100.0, 1,000 ppm 1.00 to 10.00, 100.0, 200 ppt
-10.0 to 110.0°C
Resolution:
0.01 pH
0.1°C
0.01, 0.1, 1 µS 0.01, 0.1 mS
0.01, 1, 1.0 ppm 0.01, 0.1 ppt
0.1°C
Accuracy:
±0.01 pH
±0.5°C
±1% full scale or ±1 digit
±1% full scale or ±0.5 digit
±0.5°C
Calibration:
Up to 3 Buffer Values (pH 4.00, 7.00, 10.0)
Offset 0.1°C increments
up to 5 points (1 per range) for multi-point calibration; or 1 point for single point for entire range
Offset 0.1°C increments
Temperature Compensation:
Automatic Temperature Compensation (ATC)
Automatic Temperature Compensation (ATC) fixed 2% per °C factor, adjustable 73%
Power:
Four AAA alkaline batteries (supplied) >70 hours continuous use
Four AAA alkaline batteries (supplied) >60 hours continuous use
Display:
Single Custom LCD
Single Custom LCD
Auto shut-off:
After 17 minutes
After 17 minutes
Operating Temperature:
32 to 122°F; 0 to 50°C
32 to 122°F; 0 to 50°C
Shipping:
NH (3)
NH (3)
Size:
2.8 W x 5.8 H x 1.4 D inches
2.8 W x 5.8 H x 1.4 D inches
Portable hand-held dissolved oxygen meter designed to provide measurements for the most critical water quality parameter. Digital readout provides mg/L, % saturation, and temperature readings by selecting a mode. Features automatic temperature compensation (ATC) for mg/L and % saturation; salinity compensation is manual by direct dial. Meter comes packaged in a convenient carrying case with 2 replacement membrane cartridges, electrolyte, and protective probe storage bottle.
No meter warm-up required
Low maintenance probe
Key in salinity and pressure values manually
Independent 100% and zero adjustment calibrations
Offset adjustment capabilities
Displays electrode diagnostics
Easily toggle from mg/L (ppm) or % saturation to temperature mode
Specifications
Range
Resolution
Accuracy
mg/L (ppm)
0.00 to 20.00 mg/L (ppm)
0.01 mg/L (ppm)
±1.5% FS
% Saturation
0.0 to 200.0%
0.1%
±1.5% FS
Temp.
-5.0 to 150°C
0.1°C
±0.5°F
Salinity Correction
0.0 to 50.0 ppt
0.1 ppt
Method: Key in manually or automatic correction
Barometric Pressure Correction
500 to 1499 mm Hg
1 mm Hg
Method: Key in manually or automatic correction
Temperature compensation
Automatic from 0 to 50°C
Operating Temperature
0 to 50°C
Probe
Galvanic, 3 ft probe cable
Power
Four 1.5V AAA batteries (included), >700 hours continuous use
Dimensions
5.5L x 2.7W x 1.3H inches
Weight
1.0 lb (0.45 kg)
Order Codes
Item Description
Order Code
Digital Dissolved Oxygen & Temperature Meter
5-0107
Replacement Probe
5-0129
Replacement Membrane Package including electrolyte solution
5-0137
Laboratory precision in a water-resistant design! Read pH, mV, temperature, and concentration with accuracy - ISEs read concentration in ppm. Easy-to-use in any test mode. Includes pH probe, temperature probe, buffers and rubber boot with stand.
Description
Code
pH Plus Direct Meter, liquid buffers (4, 7, & 10) with case
5-1936
pH Probe, gel-filled
1904
Temperature Probe
1909
Specifications
pH:
Range:
0.00 to 14.00
Resolution:
0.01
Accuracy:
±0.01
Calibration:
2 or 3 point automatic
Electrode:
Epoxy, Ag/AgCl
Temperature:
Range:
0 to 100.0°C
Resolution:
0.1°C
Accuracy:
±0.1°C
Concentration:
Range:
0.00 to 100
Resolution:
±LSD
Accuracy:
±0.5% or ±1 LSD
mV:
Range:
±500
Accuracy:
±1 mV
Resolution:
1 mV
Temperature Compensation:
Automatic Temperature Compensation (ATC)
Auto Shut-Off:
After 17 minutes
Operating Temperature:
32 to 122°F; 0 to 50°C
Inputs:
1 BNC, Temp probe, power, ref. pin
Power:
4 AAA batteries (supplied) >70 hours continuous use
Size:
2.8W x 5.8H x 1.4D inches
Optional ISE Electrodes Although the pH Plus Direct reads directly in ppm, an initial calibration is required. The standard solution, replacement electrolyte, ionic strength adjustor, and a pipet are included in the accessory kit. The ammonia accessory kit also contains replacement membranes.
Ion Spelective Electrodes
Description
Code
Ammonia
5-0043
Fluoride
5-0048
Nitrate
5-0052
Accessory Kits
Description
Code
Ammonia Accessory Kit - pHPLUS Direct Digital pH Meter
5-0098
Fluoride Accessory Kit- pHPLUS Direct Digital pH Meter
5-0099
Nitrate Accessory Kit- pHPLUS Direct Digital pH Meter
An outstanding lineup of instruments for measuring pH, Conductivity, and TDS. These handheld meters incorporate advanced microprocessor technology with attractive, compact designs resulting in a rare combination of hi-tech performance, user-friendly operation, and affordability.
Portable hand-held dissolved oxygen meter designed to provide measurements for the most critical water quality parameter. Digital readout provides mg/L, % saturation, and temperature readings by selecting a mode. Features automatic temperature compensation (ATC) for mg/L and % saturation; salinity compensation is manual by direct dial. Meter comes packaged in a convenient carrying case with 2 replacement membrane cartridges, electrolyte, and protective probe storage bottle.
Laboratory precision in a water-resistant design! Read pH, mV, temperature, and concentration with accuracy - ISEs read concentration in ppm. Easy-to-use in any test mode. Includes pH probe, temperature probe, buffers and rubber boot with stand.