802 Washington Avenue PO Box 329 Chestertown, Maryland 21620 USA
Phone:
410.778.3100
USA:
800.344.3100
FAX:
410.778.6394
LaMotte pH, Conductivity & TDS Meters
An outstanding lineup of instruments for measuring pH, Conductivity, and TDS. These handheld meters incorporate advanced microprocessor technology with attractive, compact designs resulting in a rare combination of hi-tech performance, user-friendly operation, and affordability.
Features & Order Codes
Push button operation
Three point calibration
Temperature readout
Automatic Temperature Compensation
Auto-off after 17 minutes
Hold function
Buffer recognition (pH 5 Plus meter)
Adjustable conductivity to TDS factor (TDS 6 Plus meter)
Microprocessors have enabled meter manufacturers to combine many features into smaller designs with better accuracy. The 5 Series meters are good examples (see specifications below). All meters include electrodes and temperature probes, and are available with or without a carrying case.
The pH 5 Plus without case includes pH 4, 7, and 10 buffer tablets.
The pH 5 Plus with case includes pH 4, 7, and 10 buffer liquids.
The TDS 6 Plus and Con 6 Plus with carrying cases include two calibration standards.
All meters have two-year warranties.
Item Description
Order Code
pH 5 Meter (pH), without Case
5-0034
pH 5 Meter (pH), with Case
5-0035
CON 6 Meter (Conductivity), without Case
5-0038-01
CON 6 Meter (Conductivity), with Case
5-0039-01
TDS 6 Meter (TDS), without Case
5-0036-01
TDS 6 Meter (TDS), with Case
5-0037-01
Specifications:
Model
pH 5 Plus (pH)
pH 5 Plus (Temperature)
CON 6 Plus Meter (Conductivity)
TDS 6 Plus Meter (TDS)
CON 6 Plus & TDS 6 Plus Meters (Temperature)
Order Code
w/out case 5-0034 with case 5-0035
w/out case 5-0038-01 with case 5-0039-01
w/out case 5-0036-01 with case 5-0037-01
Range:
0.00 to 14.00 pH
0.0 to 100.0°C
0.0 to 20.00, 200.00 2,000.0 µS 0 to 20.00, 200.0 mS
0.0 to 10.00, 100.0, 1,000 ppm 1.00 to 10.00, 100.0, 200 ppt
-10.0 to 110.0°C
Resolution:
0.01 pH
0.1°C
0.01, 0.1, 1 µS 0.01, 0.1 mS
0.01, 1, 1.0 ppm 0.01, 0.1 ppt
0.1°C
Accuracy:
±0.01 pH
±0.5°C
±1% full scale or ±1 digit
±1% full scale or ±0.5 digit
±0.5°C
Calibration:
Up to 3 Buffer Values (pH 4.00, 7.00, 10.0)
Offset 0.1°C increments
up to 5 points (1 per range) for multi-point calibration; or 1 point for single point for entire range
Offset 0.1°C increments
Temperature Compensation:
Automatic Temperature Compensation (ATC)
Automatic Temperature Compensation (ATC) fixed 2% per °C factor, adjustable 73%
Power:
Four AAA alkaline batteries (supplied) >70 hours continuous use
Four AAA alkaline batteries (supplied) >60 hours continuous use
Display:
Single Custom LCD
Single Custom LCD
Auto shut-off:
After 17 minutes
After 17 minutes
Operating Temperature:
32 to 122°F; 0 to 50°C
32 to 122°F; 0 to 50°C
Shipping:
NH (3)
NH (3)
Size:
2.8 W x 5.8 H x 1.4 D inches
2.8 W x 5.8 H x 1.4 D inches
Standardized pH Buffer Solutions
For use in calibration of pH meters. Ordering information for all buffers is listed below.
pH Value
Size
Order Code
4.00
120 mL 500 mL
2866-J 2866-L
4.01
120 mL 500 mL
2807-J 2807-L
6.86
120 mL 500 mL
2808-J 2808-L
7.00
120 mL 500 mL
2881-J 2881-L
9.18
120 mL 500 mL
2809-J 2809-L
10.00
120 mL 500 mL
2896-J 2896-L
Insta-Test Test Strips
American Water Service 5001 South Farm Road Matthews, NC 28104 USA Tel: 800-788-4825 Website: www.purtest.com
Milby Company 6201 S. Hanover Road Elkridge, MD 21075 USA 1-800-492-7404 Website: www.milbyco.com (offices also in Virginia)
Duff Supply Company 201 E. Lafayette St. Norristown, PA 19404 USA 610-275-4453
Alamo Water Refiners, Inc. 13700 Highway 90 West San Antonio, TX USA Tel: 800-659-8400 Website: www.alamowater.com (offices in PA, FL, Mexico, and Europe)
Pearson & Timmerman, Inc. 914 Water St. Watertown, NY 13601 USA Tel: 315-782-6080